Three phase; 30Aac, 60Aac or 300Aac (300A max input)
  Constant Sampling technique, misses very little data
  Complete with Electrosoft energy analysis software
  Available as IP65/NEMA 12/4

The Electrocorder range is designed to allow users to cost effectively monitor single and three phase loads. This product will allow single and 3 phase loading and/or balancing problems to be highlighted quickly as well as assessment of energy usage over time.

Setting up the Electrocorder EC-3CT is easy, suitable for semi-technical staff. Using the supplied (free) Windows software, Electrosoft; the location’s details are input to the unit’s memory and stored. Electrosoft can then print documentation allowing users to record and/or pass on delivery instructions to colleagues. All data is also stored in a database of dispatches and returns, which tracks the whereabouts of all loggers.

Why is the Electrocorder better than other similarly priced competitors? The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at 50Hz. At the end of each averaging period, 3 quantities are saved for each channel, the True RMS average, the Max, which is the highest cycle value during the period and the Min, lowest cycle value. This means that it will record all the peaks and troughs which are one cycle or longer.

There are many models of Electrocorder, to suit many logging situations and user’s requirements.

Memory modes available: The Electrocorder can be set to start recording when it is connected and the ‘start’ button pressed and stop when the memory is full.

When recording the Electrocorder will store the average current over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest (min) cycle values during that period.

Datasheet

The current levels are stored with dates and times. With the back-up battery, the Electrocorder can continue to record for 6 months. An external 12Vdc PSU input is available, to allow for prolonged logging without batteries. The stored data is uploaded to a PC via the supplied USB cable. Using Electrosoft, the recorded current levels, dates & times can be viewed in both tabular and graphical form, exported to a spreadsheet or saved to file.

Graphs can be printed showing the recorded levels and the allowable tolerance bands. These results may then be discussed with the customer. Electrosoft also provides an internal database which effectively manages the distribution of multiple units.

On the logger, recording is signified by a flashing green light. A steady red light advises users that the unit has completed recording. This model is specifically designed to accurately monitor one, two or three current channels. Allowing you to monitor the loading and energy consumption of the installation.

Features