Full visibility of samples
  Easy access to working chamber
  Many applications: Plant propagation, Humidity tests, Simulation of tropical conditions, Incubation of complete instruments and Corrosion testing
  Choice of analogue or digital control

Constructed from clear Acrylic® polymer to give total visibility of samples at all times.

Designed for easy access with hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.

For analogue model SI60, setting the temperature is via a calibrated knob. For digital model SI60D, setting the temperature is more accurately achieved via the LCD display. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37ºC. Additionally there is a temperature safety cut-out set at 72ºC.

The incubator is supplied flat packed, for assembly at point of use. Assembly is simple and requires only a screwdriver.

For larger views, please click on the small photos above.

Ordering Information