A sample concentrator is a fast and convenient way of concentrating
multiple samples in a block heater at once. Utilising a simple gas
delivery system the sample concentrator passes gas over the surface
of your samples via stainless steel needles. This in combination with
the heat from the block heater below produces ideal conditions for
fast, efficient evaporation.
The gas delivery needles are inserted into a silicon membrane, in
virtually any configuration. The height of the sample concentrators
gas reservoir is located on an adjustable stand for accurate height
control. This combines to make the sample concentrator compatible
with any combination of block heater sample vessels.
The gas
delivery needles are available in either 76mm or 127mm lengths to
suit various tube heights, optional PTFE coating is available for
corrosive solutions.
The Bibby ScientificŪ sample concentrator is only
compatible with the SBH130D/3 and SBH200D/3.
|
Ordering Information
|
SBH130D/3 - Block heater, 3 block, digital, 130°C
SBH200D/3 - Block heater, 3 block, digital, 200°C
SBHCONC/1 - Sample concentrator
F7209 - Needles, 76mm (pack of 100)
F7210 - Needles, 127mm (pack of 100)
FSC4NCS - Needles, 76mm, PTFE coated (pack of 100)
FSC4NCL - Needles, 127mm, PTFE coated (pack of 100)
Note: Needles must be purchased separately.
|
|
