Low temperature, single channel for Industrial & Clinical analysis
  Sodium & Potassium with Li, Ba & Ca options
  Electronic ignition
  Flame failure safety system
  Fine & coarse sensitivity controls
  Operates on propane, butane, natural gas or L.P.G. supplies

The Models PFP7 and PFP7/C are low temperature, single channel flame photometers designed for the routine determinations of Na & K (Ca, Ba and Li optional). With in-built automatic flame failure detection for user safety these products are ideal for use in clinical, industrial and educational applications.

The Model PFP7/C is specifically designed for use in clinical applications. The in-built lineariser circuitry enables readings of both Na and K at the normal clinical serum concentrations to be displayed directly in mmol/l. Serum samples must be diluted 200:1 or 100:1 prior to presentation to the flame photometer. The Series 7 diluter is available to enable this to be carried out efficiently and accurately.

Data Sheet

500 094 - Model PFP7 supplied with Na & K filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 230V 50Hz.

500 401 - Model PFP7/C supplied with Na & K filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 110V 60Hz.

500 600 - Model PFP7 supplied with Na, K, Li, Ba & Ca filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 230V 50Hz.

500 601 - Model PFP7 supplied with Na, K, Li, Ba & Ca filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 110V 60Hz.

500 200 - Model PFP7/C supplied with Na & K filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 230V 50Hz

500 214 - Model PFP7/C supplied with Na & K filters fitted, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined operating/service manual. For use on 110V 60Hz.