Easy clean ceramic top
  Robust construction
  Accurate heat control
  Powerful stirring action
  Full safety compliance (IEC1010, CE, ISO9001 manufacture)

The 1000 series hotplates and stirrers are economic units offering the performance needed in the most demanding applications. The low profile case construction is carefully designed to ensure that any spillage is prevented from affecting the performance of the unit. The robust cast plinth will withstand the most severe handling and the paint finish has been selected to minimise the effects of chemical spillage. Two tapped retort bosses are provided to the rear of the case to enable standard laboratory scaffolding to be used in conjunction with the unit.

Heating is controlled by a precision energy regulator. The ceramic surface temperature can be controlled within close limits from values just above ambient to a maximum between 450 and 500C

Stirring can be controlled from 0-2000rpm, with smooth and rapid speed changes guaranteed to ensure the magnetic follower always stays under control.

Data Sheet

100 071 - Model 1000 Hotplate/Stirrer supplied with stirrer bar and operating instructions. (230V)

100 051 - Model 1000 Hotplate/Stirrer supplied with stirrer bar and operating instructions. (110V)

100 171 - Model 1001 Hotplate supplied with operating instructions. (230V)

100 151 - Model 1001 Hotplate/Stirrer supplied with stirrer bar and operating instructions. (110V)

100 271 - Model 1002 Stirrer supplied with stirrer bar and operating instructions. 230V

100 251 - Model 1002 Stirrer supplied with stirrer bar and operating instructions. 110V